In this site I introduce my ideas to produce energy from gravitation.The main purpose of this energy in my mind is to use it as primary energy when producing hydrogen from water. This process could be something like

Gravitator -> transform rotation to faster -> generator -> battery -> electrolysis -> hydrogen

Of course this can be used in other purposes too, if it works ;)

Currently my biggest problem is to build a prototype based on these ideas. If you can help me or if you are interested in these ideas and want to test these yourself, please feel free. I hope you let me know if you succeed or if you have any suggestions to make this better/work.

The idea making this information public is to prevent anyone get patent or any other way have legally protected rights to use these ideas. I hope, that if these are in any way helpful and working ideas, everyone can use these ideas for free and for any purposes. I guess I'm little bit sick of “profit comes first” -thinking...

Because I'm not a physicist there are a lot of open questions and descriptions of the ideas are not at the professional level ;)

There are four different kind of gravitator: Gravitator, Gravitator II, Gravitator III, Gravitator IV.

• Idea in Gravitator I is to use outer air pressure as primary energy
• Idea in Gravitator II is to keep more weight all the time on one side of wheel.
• Gravitator III (Blacksmith blower wheel): Some kind of combination of Gravitator and Gravitator II
• Idea in Gravitator IV is to use outer air pressure as primary energy. It is an improvment of Gravitator I

My personal order for these ideas is

1. Gravitator IV
2. Gravitator III (Blacksmith blower wheel): quite easy to build/test, maybe most promising
3. Gravitator II: easy to build/test, quite fast and if it works quite powerful
4. Gravotator: powerful but slow, hard to build

All versions are based on following boundary conditions

- all the energy in this system must come from gravitation - no outer energy sources.
- transform this energy (or part of it) to kinetic energy

The basic idea in Gravitator IV is to lift up water and use falling water as energy source. Water can be collected e.g. into some kind of funnel with several double piston. Of course you can get energy also from double piston's turn. I think it is also possible connect upper piston directly to lower piston. In this way you don't need the pool. I guess which one to use depends on for what purpose this machine is used. (Values in these pictures are only example values).

Version with pool.

Version without pool

The basic idea in Gravitator III is to keep more weight all the time on right side of the wheel. This is done by using the air pressure when moving the water.

With this idea I'm not sure if it is necessary/good to divide the "rubber tire" into cells.

Below are following Gravitator's main areas explained

• energy source
• how to get energy from Gravitator

Gravitator - the energy source

The actual energy in this system comes from module shown below.

Note: In these pictures there is only one big piston. I think it could be possible to use several small pistons too.

Idea:

The basic idea is to move liquid up using gravitation. In this picture this means that the liquid moves from B to A. This will make A heavier than B (X kg + weight of liquid difference between A and B). The energy that moves liquid from B to A is A negative pressure + B pressure

Questions:

• What should be the X kg
• how much liquid should be in A and B?

Gravitator - how to get energy from Gravitator

Idea:

In this example system there are two energy modules. It is possible to have 2 - n energy modules in this wheel. As an example the modules X kg is set to 100 kg, the liquid is water and amount of water is 10 000 liters. The idea is to stop rotation for X time. The X is the time required to move 10 000 liters water from lower tank to upper tank by pressure and negative pressure.

In the first picture the system is in start position and the rotation is blocked. After the water have been lifted up from lower tank to upper tank the rotation block will be released and at the same time the water flow from one tank to an other will be blocked.

In the second picture the water have been lifted to upper tank and the rotation block has been released and the water flow between tanks have been blocked.

Third picture illustrates the situation where wheel has rotate 90 degrees. Rotation is blocked again and the water flow block between two tanks have been released.

Energy:

The energy that can be get out of this system is in the weight of moved water, in this example 10 000 liters water that will turn the wheel after the rotation block have been released. (Actually it seems to be little bit more because there are two 10 000 liters tanks that turns this wheel)

Questions:

How to handle rotation and liquid flow blocking?

The system is like a clock. First waiting the water been lifted up from lower tank to upper, turns 90 degrees, wait the water to be lift up, turns 90 degrees, wait the water to be moved up etc.

I have done also some home made tests for Gravitator. Pictures of these tests can be found here.

More ideas and information about free energy and other stuff related to energy can be found at

www.overunity.com

PESWiki.com

www.energyplanet.info

www.alternative-energy-news.info

So here it was... If you have any questions or if you want to give some feedback you can contact me by email. Please do not hesitate to do it.

Michael Kankkonen

email: michael.kankkonen@vnetcon.org